Maintenance Schedule for Normal Conditions - European Model

Maintenance Schedule for Normal Conditions - European Model

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200 
miles x 1,000 12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0 112.5 125.0 
months 12 24 36 48 60 72 84 96 108 120 
Replace engine oil l l l l l l l l l l 
Replace engine oil filter l l l l l l l l l l 
Replace air cleaner element Every 40,000 km (25,000 miles) 
Inspect the valve clearance
Check valve clearance 		Every 40,000 km (25,000 miles) 
Replace fuel filter      l     
Replace spark plugs Every 40,000 km (25,000 miles) 
Inspect and adjust drive belts
  • Check for cracks, damage.
  • Check deflection and tension.
 		 l  l  l  l  l 
Inspect idle speed      l     
Replace engine coolant
Use Honda All Season Antifreeze/Coolant Type 2 		At 200,000 km (120,000 miles) or 10 years,
then replace every 100,000 km (60,000 miles) or 5 years 
Replace transmission fluid (MTF)
Use Honda MTF (Manual Transmission Fluid) 		Every 120,000 km (75,000 miles) or 8 years 
Replace CVT fluid (ATF)
Use Honda ATF-Z1 		   l   l   l 
Inspect front and rear brakes l l l l l l l l l l 
Replace brake fluid
Use only DOT 3 or DOT 4 brake fluid (We recommend Honda Brake Fluid). Check that brake fluid level between the upper and lower marks on the reservoir. 		Every 3 years 

  

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200 
miles x 1,000 12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0 112.5 125.0 
months 12 24 36 48 60 72 84 96 108 120 
Check parking brake adjustment
Check the parking brake operation 		l l  l  l  l  l 
Replace dust and pollen filter Every 30,000 km (18,750 miles) or 1 year 
Check lights alignment
Check the position of the headlights 		l l l l l l l l l l 
Test drive (Check for noise, road stability, vibrations, and dashboard operations) l l l l l l l l l l 
Visually inspect the following items
  • Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
  • Check tightness of screws, nuts, and joints. If necessary, retighten.
 
Tie rod ends, steering gearbox, and boots
  • Check rack grease and steering linkage.
  • Check the boot for damage and leaking grease.
 		l l l l l l l l l l 
Suspension components
  • Check the bolts for tightness.
  • Check all dust cover for deterioration and damage.
 
Driveshaft boots
  • Check boot and boot band for cracks.
  • Check rack grease.
 
Brake hoses and lines (including ABS)
Check the master cylinder, proportioning control valve, and ABS modular for damage and leakage 
All fluid levels and condition of fluid 
Exhaust system
Check the catalytic converter heat shield, exhaust pipe, and muffler for damage. leaks and tightness 
Fuel lines and connections
  • Check fuel lines for loose connections, cracks, and deterioration.
  • Retighten loose connections and replace any damaged parts.
 
Tyre condition
Check for pressure, puncture or cuts and irregular thread wear