Maintenance Schedule for Severe Conditions - Australia and New Zealand Models (L12A/L13A except KM/KP)

Maintenance Schedule for Severe Conditions - Australia and New Zealand Models


Follow the Severe Conditions Maintenance Schedule if the customer's vehicle is driven MAINLY under one or more of the following conditions:


If the customer's vehicle is driven OCCASIONALLY under severe conditions, follow the Normal Conditions Maintenance Schedule.

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200 
miles x 1,000 12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0 112.5 125.0 
months 12 24 36 48 60 72 84 96 108 120 
Replace engine oil Every 5,000 km (3,125 miles) or 6 months 
Replace engine oil filter Every 10,000 km (6,250 miles) or 6 months 
Replace air cleaner element
  • Use normal schedule except in dusty conditions.
 
l l l l l l l l l l 
Inspect valve clearance  l  l  l  l  l 
Replace fuel filter  l  l  l  l  l 
Replace spark plugs  l  l  l  l  l 
Inspect and adjust drive belts  l  l  l  l  l 
Inspect idle speed     l     l 
Replace engine coolant At 200,000 km (120,000 miles) or 10 years, then replace every 100,000 km (60,000 miles) or 5 years 
Replace manual transmission fluid (MTF)   l   l   l  
Replace CVT fluid (ATF)
  • Use genuine Honda ATF-Z1
  • Replace every 40,000 km (25,000 miles) or 2 years, if the vehicle is driven under high speed driving in high temperature (over 35 °C/95 °F) condition.
 
   l   l   l 
Inspect front and rear brakes Every 10,000 km (6,250 miles) or 6 months 
Replace brake fluid Every 3 years 

Service at the indicated distance or time whichever comes first. km x 1,000 20 40 60 80 100 120 140 160 180 200 
miles x 1,000 12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0 112.5 125.0 
months 12 24 36 48 60 72 84 96 108 120 
Check parking brake adjustment l l  l  l  l  l 
Check lights alignment l l l l l l l l l l 
Test drive (noise, stability, dashboard operation)
  • Check for road stability, noise, vibration and dashboard operation.
 
l l l l l l l l l l 
Rotate tires
  • Check tire inflation and condition at least once per month.
 
Every 10,000 km (6,250 miles) 
Visually inspect the following items:
  • Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
  • Check tightness of screws, nuts, and joints. If necessary, retighten.
 
Tie rod ends, steering gearbox, and boots Every 10,000 km (6,250 miles) or 6 months 
Suspension components
  • Check the bolts for tightness.
  • Check all dust cover for deterioration and damage.
 
Driveshaft boots 
Brake hoses and lines (including ABS) l l l l l l l l l l 
All fluid levels and condition of fluid 
Exhaust system 
Fuel lines and connections