Maintenance Schedule for Normal Conditions - Australia and New Zealand Models

Service at the indicated distance or time whichever comes first.		km x 1,000	20	40	60	80	100	120	140	160	180	200
		miles x 1,000	12	24	36	48	60	72	84	96	108	120
		months	12	24	36	48	60	72	84	96	108	120
Replace engine oil			Every 10,000 km (6,000 miles) or 1 year
Replace engine oil filter			l	l	l	l	l	l	l	l	l	l
Replace air cleaner element				l		l		l		l		l
Inspect valve clearance				l		l		l		l		l
Replace fuel filter				l		l		l		l		l
Replace spark plugs				l		l		l		l		l
Inspect and adjust drive belts Check for cracks, damage, deflection and tension				l		l		l		l		l
Inspect idle speed							l					l
Replace engine coolant Use genuine Honda All Season Antifreeze/Coolant Type 2			At 200,000 km (120,000 miles) or 10 years, then replace every 100,000 km (60,000 miles) or 5 years
Replace manual transmission fluid Use genuine Honda Manual Transmission Fluid (MTF)								l
Replace CVT fluid Use genuine Honda ATF-Z1 (ATF)						l			l			l
Inspect front and rear brakes Check the brake pad and disc thickness. Check for damage and cracks Check the wheel cylinder for leaks Check the brake linings for cracking, glazing, wear and contamination Check the calipers for damage, leaks, and tightness			l	l	l	l	l	l	l	l	l	l
Replace brake fluid Use only DOT 3 brake fluid (We recommend Genuine Honda Brake Fluid). Check that brake fluid level between the upper and lower marks on the reservoir			Every 3 years
Check parking brake adjustment			l	l		l		l		l		l
Check lights alignment Check the position of the headlights			l	l	l	l	l	l	l	l	l	l
Test drive (noise, stability, dashboard operation) Check for road stability, noise, vibration and dashboard operation.			l	l	l	l	l	l	l	l	l	l
Rotate tires Check tire inflation and condition at least once per month.			Every 10,000 km (6,000 miles)

Service at the indicated distance or time whichever comes first.		km x 1,000	20	40	60	80	100	120	140	160	180	200
		miles x 1,000	12	24	36	48	60	72	84	96	108	120
		months	12	24	36	48	60	72	84	96	108	120
Visually inspect the following items: Check for correct installation and position, check for cracks, deterioration, rust, and leaks. Check tightness of screws, nuts, and joints. If necessary, retighten.
Tie rod ends, steering gearbox, and boots Check rack grease and steering linkage. Check the boot for damage and leaking grease			l	l	l	l	l	l	l	l	l	l
Suspension components Check the bolts for tightness Check all dust cover for deterioration and damage
Driveshaft boots Check the boot and boot band for cracks Check rack grease
Brake hoses and lines (including ABS) Check the master cylinder, proportioning control valve and ABS modulator and leakage
All fluid levels and condition of fluid Check levels and check for leaks. If necessary, add engine coolant, MTF, ATF,brake fluid, windshield fluid, and battery fluid.
Exhaust system Check the exhaust pipe and muffler for damage, leaks and tightness
Fuel lines and connections Check fuel lines for loose connections, cracks and deterioration. Retighten loose connections and replace any damaged parts