|
Doors automatically relock 30 seconds after being unlocked with the transmitter even though a door has been opened
NOTE: Before troubleshooting, check the B-CAN DTCs. If any DTC is indicated, troubleshoot the indicated DTC first.
-
Place the ceiling light switch in the DOOR position.
-
Turn the ignition switch to ON (II).
-
Watch the ceiling light and the door indicators on the gauge control module.
|
Do the ceiling light and door indicators come on when the door is open, and go off when the door is closed?
|
|
YES
|
-
|
Substitute a known-good under-dash fuse/relay box and recheck. If the symptom goes away, replace the original under-dash fuse/relay box.■
|
|
NO
|
-
|
Repair an open in the wire between the MICU and each door switch. If the wire is OK, replace the door switch.■
|
|