Charging System Circuit Diagram
Charging system indicator does not come on with the ignition switch in ON (II)
Charging system indicator stays on
Battery discharged
Battery overcharged
Alternator Overhaul
Alternator and Regulator Circuit Troubleshooting
Alternator Control Circuit Troubleshooting
Charging System Indicator Circuit Troubleshooting
Drive Belt Inspection
Drive Belt Auto-tensioner Inspection
Coolant Check
Water Pump Inspection
Cooling Fan Controls Component Location Index
Cooling Fan Controls Circuit Diagram
Engine overheats
The radiator fan does not run when the engine coolant temperature is above 93 °C (199 °F)
The A/C condenser fan does not run when the engine coolant temperature is above 93 °C (199 °F)
Both the radiator fan and the A/C condenser fan does not run when the engine coolant temperature is above 93 °C (199 °F)
The radiator fan run with the ignition switch to ON (II), and the engine coolant temperature below 90 °C (194 °F)
The A/C condenser fan run with the ignition switch to ON (II), and the engine coolant temperature below 90 °C (194 °F)
Both the radiator fan and the A/C condenser fan run with the ignition switch to ON (II), and the engine coolant temperature below 90 °C (194 °F)
Radiator and A/C Condenser Fan Circuit Troubleshooting
Radiator Fan Circuit Troubleshooting
Engine Compression Inspection
Cylinder Head Inspection for Warpage
Cylinder Head Cover Removal
Camshaft Sprocket Removal
Cylinder Head Valve, Spring, and Valve Seal Removal
Cylinder Head Valve Inspection
Cylinder Head Valve Stem-to-Guide Clearance Inspection
Engine Oil Pan Removal
Connecting Rod and Crankshaft End Play Inspection
Connecting Rod Bolt Inspection
Crankshaft and Piston Removal
Crankshaft Inspection
Ignition System Component Location Index
Ignition Timing Inspection
Spark Plug Inspection
Low Oil Pressure Indicator Circuit Diagram
Low Oil Pressure Indicator Circuit Troubleshooting (Open)
Low Oil Pressure Indicator Circuit Troubleshooting (Short)
Starter Overhaul
Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed (M/T model)
Set speed will not resume when the resume/accel switch is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the clutch pedal) (M/T model)
Starting System Circuit Diagram
Cylinder Head Component Location Index
Cylinder Head Removal
Camshaft Removal
Camshaft Inspection
Cylinder Head Rocker Arm Assembly Removal
Cylinder Head Rocker Arm and Shaft Inspection
Cam Chain Removal
Fuel and Emissions System Description - VTEC System
VTEC Component Location Index
VTEC System Oil Pressure Troubleshooting
Engine Removal
Engine Block Component Location Index
Engine Block and Piston Inspection
Engine Lubrication Component Location Index
Engine Oil Pump Overhaul
Cylinder Head Removal
Camshaft Removal
Fuel and Emissions System Description - VTEC System
VTEC Component Location Index
VTEC System Oil Pressure Troubleshooting
Starting System Component Location Index
Starting System Circuit Diagram
Starter System Circuit Troubleshooting
Starting System Component Location Index
Starter System Circuit Troubleshooting
Starting System Circuit Diagram
Fuel and Emissions System Description - VTEC System
Alternator
Drive belt
Coolant reservoir
Radiator
Radiator cap
Thermostat
Head
Camshaft
Rocker arm
Valve
Valve guide
Valve spring
Valve seat
Compression
Block
Connecting rod
Crankshaft
Crankshaft bearing
Piston
Piston pin
Piston ring
Ignition timing
Ignition coil
Spark plug
Oil pump
Relief valve
Engine oil
Starter
Charging System Component Location Index
Alternator
Drive belt
Coolant reservoir
Radiator
Radiator cap
Thermostat
Cruise Control Component Location Index
Cruise Control Circuit Diagram
Cruise control cannot be set
Cruise control can be set, but the cruise main indicator does not come on
Cruise control can be set, but the cruise control indicator does not come on
Vehicle does not decelerate or accelerate accordingly when the set/decel or resume/accel switch is pressed
Set speed does not cancel when the brake pedal is pressed
Set speed does not cancel when the cruise control main switch is pressed
Set speed does not cancel when the cancel switch is pressed
Set speed will not resume when the resume/accel switch is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)
With the ignition switch in ON (II), and the lighting switch turned on, the cruise control combination switch illumination does not come on
Cylinder Head Component Location Index
Head
Camshaft Inspection
Camshaft
Cylinder Head Rocker Arm Assembly Removal
Rocker arm
Cylinder Head Rocker Arm and Shaft Inspection
Cam Chain Removal
Valve
Valve guide
Valve spring
Valve seat
Engine Removal
Compression
Engine Block Component Location Index
Engine Block and Piston Inspection
Block
Connecting rod
Crankshaft
Crankshaft bearing
Piston
Piston pin
Piston ring
Ignition timing
Ignition coil
Spark plug
Engine Lubrication Component Location Index
Excessive engine oil consumption
Low oil pressure indicator does not come on with the ignition switch ON (II)
Engine oil level sensor system indication symbol comes on in the multi information display
Low oil pressure indicator stays on
Engine Oil Pump Overhaul
Oil pump
Relief valve
Engine oil
Engine does not start (does not crank)
Engine cranks, but does not start
Engine is hard to start
Engine cranks slowly
Starter
Cooling System Component Location Index
Charging System Component Location Index
Cruise Control Component Location Index
Cruise Control Circuit Diagram
Cruise control cannot be set
Cruise control can be set, but the cruise main indicator does not come on
Cruise control can be set, but the cruise control indicator does not come on
Vehicle does not decelerate or accelerate accordingly when the set/decel or resume/accel switch is pressed
Set speed does not cancel when the brake pedal is pressed
Set speed does not cancel when the cruise control main switch is pressed
Set speed does not cancel when the cancel switch is pressed
Set speed will not resume when the resume/accel switch is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)
With the ignition switch in ON (II), and the lighting switch turned on, the cruise control combination switch illumination does not come on
Excessive engine oil consumption
Low oil pressure indicator does not come on with the ignition switch ON (II)
Low oil pressure indicator stays on
Engine Oil Level Check
Engine does not start (does not crank)
Engine cranks, but does not start
Engine is hard to start
Engine cranks slowly
Cylinder Head Component Location Index
Camshaft Inspection
Cylinder Head Rocker Arm Assembly Removal
Cylinder Head Rocker Arm and Shaft Inspection
Cam Chain Removal
Engine Removal
Engine Block Component Location Index
Engine Block and Piston Inspection
Engine Lubrication Component Location Index
Engine Oil Pump Overhaul
Alternator
Drive belt
Cooling System Component Location Index
Coolant reservoir
Radiator
Radiator cap
Thermostat
Head
Camshaft
Rocker arm
Valve
Valve guide
Valve spring
Valve seat
Compression
Block
Connecting rod
Crankshaft
Crankshaft bearing
Piston
Piston pin
Piston ring
Ignition timing
Ignition coil
Spark plug
Oil pump
Relief valve
Engine oil
Starter
Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed (M/T model)
Set speed will not resume when the resume/accel switch is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the clutch pedal) (M/T model)
Starting System Circuit Diagram
Starting System Circuit Diagram
Charging System Symptom Troubleshooting Index
Drive Belt Auto-tensioner Pulley Replacement
Radiator Replacement
Connecting Pipe Replacement
Thermostat Replacement
Water Pump Replacement
Cooling Fan Controls Symptom Troubleshooting Index
Cylinder Head Valve Guide Replacement
Cylinder Head Valve Seat Reconditioning
Engine Mount Torque Rod Replacement
Engine Mount Torque Rod Bracket Replacement
Side Engine Mount Replacement
Transmission Mount Bracket Replacement
Transmission Mount Replacement
Engine Block Cylinder Bore Honing
CKP Pulse Plate Replacement
Piston, Pin, and Connecting Rod Replacement
Piston Ring Replacement
Ignition Coil Replacement
Engine Oil Filter Replacement
Engine Oil Filter Feed Pipe Replacement
Engine Oil Replacement
Engine Oil Pressure Switch Replacement
Clutch Pedal Position Switch B Replacement
Cylinder Head Valve Clearance Adjustment
Connecting Rod Bearing Replacement
Crankshaft Main Bearing Replacement
Exhaust Pipe and Muffler Replacement
Coolant Replacement
Cruise Control Symptom Troubleshooting Index
Cylinder Head Valve Clearance Adjustment
Connecting Rod Bearing Replacement
Crankshaft Main Bearing Replacement
Exhaust Pipe and Muffler Replacement
Engine Lubrication Symptom Troubleshooting Index
Engine Oil Replacement
Starting System Symptom Troubleshooting Index
Coolant Replacement
Cruise Control Symptom Troubleshooting Index
Engine Lubrication Symptom Troubleshooting Index
Starting System Symptom Troubleshooting Index
Cylinder Head Valve Clearance Adjustment
Connecting Rod Bearing Replacement
Crankshaft Main Bearing Replacement
Exhaust Pipe and Muffler Replacement
Coolant Replacement
Clutch Pedal Position Switch Replacement
Cylinder Head Cover Installation
Camshaft Sprocket Installation
Cam Chain Case Oil Seal Installation
Cylinder Head Valve, Spring, and Valve Seal Installation
Engine Block Drain Bolt/Sealing Bolt Installation
Engine Oil Pan Installation
Crankshaft/Oil Seal (Transmission End) Installation
Piston Installation
Engine Oil/Air Separator Installation
Cruise Control (ECM/PCM) Input Test
Cylinder Head Installation
Camshaft Installation
Cylinder Head Rocker Arm Assembly Installation
Cam Chain Installation
Engine Installation
Cylinder Head Installation
Camshaft Installation
Cylinder Head Rocker Arm Assembly Installation
Cam Chain Installation
Engine Installation
Cylinder Head Rocker Arm Assembly Installation
Cam Chain Installation
Engine Installation
Cruise Control (ECM/PCM) Input Test
Alternator Removal and Installation
Drive Belt Auto-tensioner Removal/Installation
Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation
Thermostat Housing Removal and Installation
Water Outlet Removal and Installation
CMP Pulse Plate Removal and Installation
Crankshaft Pulley Removal and Installation
VTEC Rocker Arm Oil Control Valve Removal/Installation
Starter Removal and Installation
Drive Belt Removal/Installation
Drive Belt Removal/Installation
Radiator Test
Radiator Cap Test
Radiator and A/C Condenser Fan Motor Test
Thermostat Test
Cruise Control Combination Switch Test
Engine Oil Pressure Test
Engine Oil Pressure Switch Test
Starter Performance Test
Starter Solenoid Test
Clutch Pedal Position Switch B Test
VTEC Rocker Arm Test
VTEC Rocker Arm Test
VTEC Rocker Arm Test
Clutch Pedal Position Switch Test
Cylinder Head Rocker Arm and Shaft Disassembly/Reassembly
Cylinder Head Rocker Arm and Shaft Disassembly/Reassembly
Cylinder Head Rocker Arm and Shaft Disassembly/Reassembly