Raise the front of the vehicle, and support it with safety stands in the proper locations.

Remove the front wheels.

Loosen the damper pinch bolts (A), and adjust the camber angle by moving the bottom of the damper within the range of the damper pinch bolt free play.

Tighten the damper pinch bolts to the specified torque.

Clean the mating surfaces of the brake disc and the inside of the wheel, then install the front wheels.

Lower the vehicle to the ground, and bounce the front of the vehicle up and down several times to settle the suspension.

Measure the camber angle.

Raise the front of the vehicle, and support it with safety stands in the proper locations.

Remove the front wheels.