Dashboard Center Panel Removal/Installation
|
Without Audio System
NOTE:
-
When removing components, use the trim tool or equivalent.
-
Take care not to scratch the dashboard and related parts.
-
Open the passenger's tray lid.
-
Remove the center panel (A).
|
-1.
|
While carefully lifting the panel with the appropriate trim tool, insert the trim tool into the gap (B) between the dashboard and the panel.
|
|
-2.
|
Use the trim tool to gently pry the panel up partially to release the clips (C, D), then pull the panel up to remove the panel.
|
|
-3.
|
Disconnect the hazard warning switch connector (E).
|
-
Install the panel in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.
-
Make sure each connector is plugged in properly.
|
|