( TF09EAFE34100041701MDAT00 )
MTF Inspection and Replacement

  1. Park the vehicle on level ground, and turn the engine OFF.
  1. Raise the vehicle on a lift and make sure it is securely supported.
  1. Remove the filler plug (A) and sealing washer (B), check the condition of the MTF and make sure it is at the proper level (C).

  1. If the MTF is dirty, remove the drain plug (A) and drain the MTF.
  1. Reinstall the drain plug with a new sealing washer (B), and refill the transmission with MTF to the proper level. Always use Genuine Honda Manual Transmission Fluid (MTF).

    Fluid Capacity

    1.5 L (1.6 US qt, 1.3 lmp qt) at fluid change
    1.6 L (1.7 US qt, 1.4 lmp qt) at overhaul

  1. Install the filler plug (C) with a new sealing washer (D).
  1. Lower the vehicle on the lift.