Use this chart to identify the type of relay, then do the test listed for it.
Relay
|
Test
|
A/C compressor clutch relay
|
Normally-open type
|
A/C condenser fan relay
|
A/F sensor relay
|
Blower motor relay
|
ETCS control relay
|
Front fog light relay
|
Horn relay
|
Ignition coil relay
|
Lighting relay 1
|
Lighting relay 2
|
PGM-FI main relay 1 (FI MAIN)
|
PGM-FI main relay 2 (FUEL PUMP)
|
Power window relay (P/W)
|
Radiator fan relay
|
Rear window defogger relay
|
Starter cut relay (ST CUT)
|
Subfuel pump relay
|
Normally-open type
Check for continuity between the terminals:
-
There should be continuity between the No. 1 and No. 2 terminals when battery power is connected to the No. 4 terminal, and body ground is connected to the No. 3 terminal.
-
There should be no continuity between the No. 1 and No. 2 terminals when power is disconnected.
|