( TF09E8YE16226622502KBAT00 )
Driveshaft Dynamic Damper Replacement

  1. Remove the dynamic damper (A).
  1. Install the new dynamic damper.
    NOTE: Be careful not to swap the dynamic dampers. Check the type of dynamic damper by its shape.
    Model
    Left/Right Driveshaft
    Dynamic Damper (A) Type
    M/T
    Left
    ———
    Right
    1
    A/T
    Left
    2
    Right
    2

Dynamic damper type 1
Dynamic damper type 2

  1. Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.
    NOTE: Check the type of dynamic damper by its shape.
Model
Left/Right Driveshaft
Dynamic Damper Type
Specified Distance (A)
M/T
Left
———
———
Right
1
287.5−291.5 mm (11.32−11.48 in.)
A/T
Left
2
251−255 mm (9.88−10.04 in.)
Right
2

Dynamic damper type 1
Dynamic damper type 2