L13Z1 engine
NOTE:
-
Identify each part as it is removed so that each item can be reinstalled in its original position.
-
-
If reused, the rocker arms must be installed in the their original location.
-
Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.
-
Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.
-
When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.
-
When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.
|
|