Driveshaft Dynamic Damper Replacement
Remove the inboard joint.
Remove the dynamic damper band.
Remove the dynamic damper (A).
Install the new dynamic damper.
NOTE: Be careful not to swap the dynamic dampers. Check the type of dynamic damper by its shape.
Model
Left/Right Driveshaft
Dynamic Damper (A) Type
M/T
Left
———
Right
1
A/T
Left
2
Right
2
Dynamic damper type 1
Dynamic damper type 2
Adjust the specified distance (A) between the outboard joint side and the dynamic damper edge.
NOTE: Check the type of dynamic damper by its shape.
Model
Left/Right Driveshaft
Dynamic Damper Type
Specified Distance (A)
M/T
Left
———
———
Right
1
287−292 mm (11.30−11.50 in.)
A/T
Left
2
250.5−255.5 mm (9.86−10.06 in.)
Right
2
Install the dynamic damper band.
Install the inboard joint.
Dynamic damper type 1
Dynamic damper type 2
