Climate Control Unit Bulb Replacement
|
NOTE:
-
Do not work in a dusty or dirty place.
-
Do not work with dusty hands.
-
Discharge static electricity from your body before and during the work.
-
Do not touch the circuit board(s) with your bare hands.
-
-
Remove the bulb(s) (A) with a flat-tip screwdriver.
|
|
-
Remove the self-tapping screws and open the cover (A), then remove the bulb (B) with a flat-tip screwdriver.
-
Install the bulb(s) in the reverse order of removal. After installation, operate the various functions to see whether it works properly.
-
|
|
