( TF09E8HG10500016701FAAT00 )
Climate Control Power and Ground Circuit Troubleshooting
  1. Check the No. 10 (7.5 A) fuse in the under-dash fuse/relay box.
Is the fuse OK?
YES -
Go to Step 2 .
NO -
Replace the fuse, and recheck. If the fuse blows again, check for a short in the No. 10 (7.5 A) fuse circuit.■
  1. Disconnect the climate control unit 36P connector.
  1. Turn the ignition switch to ON (II).
  1. Measure the voltage between the climate control unit 36P connector No. 17 terminal and body ground.
Is there battery voltage?
YES -
Go to Step 5 .
NO -
Repair open in the wire between the No. 10 (7.5 A) fuse in the under-dash fuse/relay box and the climate control unit.■
  1. Turn the ignition switch to LOCK (0).
  1. Check for continuity between the climate control unit 36P connector No. 14 terminal and body ground.
Is there continuity?
YES -
Check for loose wires and poor connections at the climate control unit 36P connector. If connections are good, substitute a known-good climate control unit and recheck. If the symptom/indication goes away, replace the original climate control unit .■
NO -
Check for open in the wire between the climate control unit and body ground. If the wire is OK, check for poor body ground at G502. ■