|
NOTE: Take care not to tear the seams or damage the seatcovers.
-
Remove the rear seat armrest (A).
|
-1.
|
Remove the rear center armrest garnish (B).
|
|
-2.
|
Remove the bolt (C) and pivot bolt (D) and wave washer (E) and plain washer (F) nylon washer (G), then remove the rear seat armrest.
|
|
-3.
|
If necessary, remove the collar (I).
|
-
Install the armrest in the reverse order of removal, and note these items:
If the collar and nylon washer are damaged or stress-whitened, replace them with new ones.
|
