Headlight Leveling Motor Replacement
With HID
Remove the headlight assembly.
Turn the HID light cover (A) 45 ° counterclockwise to remove it from the headlight housing.
Pulling the headlight reflector (A) slightly, turn the leveling motor (B) 45 ° clockwise, and pull down the tip (C) of the leveling motor.
Install in the reverse order of removal.
After installation,
adjust the headlight.
Without HID
Remove the headlight assembly.
Remove the rubber cap (A).
Pulling the headlight reflector (A) slightly, turn the leveling motor (B) 45 ° clockwise, and pull down the tip (C) of the leveling motor.
Install in the reverse order of removal.
After installation,
adjust the headlight.