NOTE:
-
If the automatic lighting/rain sensor 5P connector is connected after the battery terminal is connected, the automatic lighting/rain sensor is not confirmed by the MICU.
-
If the MICU does not confirm the automatic lighting/rain sensor, automatic wiper system does not work.
-
Connect the automatic lighting/rain sensor 5P connector first, then connect the battery terminal.
-
Remove the automatic lighting/rain sensor cover (A) and disconnect the 5P connector (B).
-
Remove the lock (C), then remove the automatic lighting/rain sensor (D).
-
Install the automatic lighting/rain sensor in the reverse order of removal.
|
|