NOTE:
-
Put on gloves to protect your hands.
-
When removing components, use the trim tools or equivalent.
-
Take care not to bend or scratch the trim and panels.
-
LHD model is shown; RHD model is symmetrical.
-
-
Remove these items:
-
-
Front pillar trim, both sides:
-
Center pillar upper/lower trim, both sides:
-
Quarter pillar trim, both sides:
-
-
-
-
-
-
-
Remove the roof wire harness (A) by detaching the harness clips (B, C, D) and disconnect the roof wire harness connector (E), (F) (with HFT unit) from the driver's side front pillar.
|