Blower Unit Removal/Installation
-
-
Cut the plastic cross brace (A) in the glove box opening with diagonal cutters in the area (B). Retain plastic cross brace to be reinstalled later.
|
|
-
Remove the bolts, and the glove box frame (A).
|
|
-
Disconnect the connectors (A) from the blower motor and the recirculation control motor. Remove the clips (B).
|
|
-
Remove the self-tapping screws and the passenger's heater duct (A).
|
|
-
Remove the self-tapping screws, the mounting nuts, and the blower unit (A).
-
Install the unit in the reverse order of removal. Make sure that there is no air leakage.
|
|