Disconnect the MAF sensor/IAT sensor connector(A), then remove the air cleaner cover (B), and the air cleaner element (C).

NOTE: Be careful not to damage the MAF sensor/IAT sensor on the air cleaner cover.

Remove the air cleaner chamber (D).

Remove the harness clamp (A), and the breather pipe (B) as shown.

Wrap the air cleaner, the cowl cover, and the battery terminal fuse box with the tapes (A) as shown.

Remove the battery setting plate, and reposition the battery (B). Reposition the radiator upper hose (C), and the breather pipe (D) as shown.

NOTE: Do not disconnect the battery terminals.

Wrap the air cleaner with the tapes (A) as shown.

Turn the air cleaner (B) case as shown.

Remove the air cleaner case (A) as shown.

Install the parts in the reverse order of removal.