NOTE:
-
Put on gloves to protect your hands.
-
Have an assistant help you when removing and installing the dashboard/steering hanger beam.
-
Take care not to scratch the dashboard, body and other related parts.
-
RHD model is shown; LHD model is symmetrical.
-
-
Remove these items:
Driver's side
-
From under the dash, disconnect the right engine compartment wire harness connector (A), the left engine compartment wire harness connector (B), the driver's door wire harness connectors (C), the interior wire harness connectors (D), floor wire harness connector (E), and remove the bolt (F), then release the battery cable (G) from the driver's under-dash fuse/relay box (H).
|