NOTE:
-
-
Detach the clips and the hooks (A) by using a flat-tip screwdriver wrapped with the protective tape, then remove the front bumper lower grille (B) from the front bumper (C).
NOTE: To remove the clips, pry the inner clip up at the edge near the line (D) on its head.
-
Install the grille in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips and the hooks into place securely.
|
With front air spoiler
Without front air spoiler
|