M/T Differential Carrier Bearings Replacement
Special Tools Required
Commercially available
bearing puller
Inner driver handle, 40 mm
07746-0030100
-
Check the carrier bearings for wear and rough rotation. If they rotate smoothly and their rollers show no signs of wear, the bearings are OK.
-
Remove the carrier bearings (A) with commercially available bearing puller (B).
|
|
-
Install the new bearing (A) with the 40 mm inner driver handle and a press. Press each bearing on until it bottoms. There should be no clearance between the bearings and the carrier.
NOTE: Turn the seal (B) part of the bearing to the outside of differential, and install it.
|
|