|
DTC P19FE:
Clutch Contact Position Adaptation Learning Value Out of Range
-
Turn the ignition switch to ON (II).
-
Clear the DTCs with the HDS.
-
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Turn the ignition switch to LOCK (0).
-
-
-
Turn the ignition switch to LOCK (0).
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
The system is OK at this time.■
|
-
Turn the ignition switch to LOCK (0).
-
-
Do the CLUTCH FLUID FILLING in the ADJUSTMENT MENU with the HDS.
-
Turn the ignition switch to ON (II).
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Check for these conditions, and repair if necessary:■
-
Slave cylinder
-
Release system
|
|