|
DTC P19FB:
Clutch Contact Position 1 and 2 Learning Not Completed
NOTE: If the Clutch Contact Position 1, 2 Learning is incomplete after replacing the clutch disc, repeat the Clutch Contact Position 1, 2 Learning several times. If the Clutch Contact Position 1, 2 Learning is still incomplete, check the clutch disc installation.
-
Turn the ignition switch to ON (II).
-
Clear the DTCs with the HDS.
-
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Turn the ignition switch to LOCK (0).
-
-
-
Check for DTCs with the HDS.
|
YES
|
-
|
Go to
Step 7
and repeat the steps.
|
|
NO
|
-
|
Clutch Contact Position 1, 2 Learning is complete.■
|
|