|
DTC P0942:
Clutch Hydraulic System Malfunction
-
Turn the ignition switch to ON (II).
-
Clear the DTCs with the HDS.
-
Change the shift lever in D.
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
-
Turn the ignition switch to LOCK (0).
-
Make sure the clutch fluid is full in the reservoir, then check the clutch hose and line joint for leaks.
|
YES
|
-
|
|
|
NO
|
-
|
Replace the hose or tighten the joint if necessary.■
|
-
Turn the ignition switch to ON (II).
-
Change the shift lever in N.
-
Do the CLUTCH ACTUATOR FULL STROKE OPERATION in the FUNCTIONAL TEST MENU with the HDS.
-
Check the CLUTCH POSITION ACTUAL in the DATA LIST with the HDS.
|
Is there more than 15 mm (0.6 in.)?
|
|
YES
|
-
|
Check for these conditions, and repair if necessary:■
|
|
NO
|
-
|
Check for these conditions, and repair if necessary:■
-
Slave cylinder
-
Release fork
|
|