DTC P0563:
TCM Power Source Circuit (+B) High Voltage
NOTE: If a high voltage battery (24 V, etc.) is connected to the vehicle, this DTC can be stored.
-
Turn the ignition switch to ON (II).
-
Clear the DTCs with the HDS.
-
Turn the ignition switch to LOCK (0).
-
Turn the ignition switch to ON (II), and wait for at least 1 second.
-
Check for DTCs with the HDS.
YES
|
-
|
|
NO
|
-
|
Intermittent failure, the system is OK at this time.■
|
|