DTC Troubleshooting: U0103
DTC U0103:
F-CAN Malfunction (ECM-TCM)
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and
review the general troubleshooting information.
Turn the ignition switch to ON (II).
Clear the DTC with the HDS.
Check for Temporary DTCs or DTCs in the DTCs MENU with the HDS.
Is DTC U0103 indicated?
YES
-
Go to the i-SHIFT system's general troubleshooting information.
■
NO
-
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the gauge control module, the TCM, and the ECM.■