M/T Differential Oil Seal Replacement
Special Tools Required
Driver handle, 15 x 135L
07749-0010000
Bearing driver attachment, 52 x 55 mm
07NAD-P200100
Oil seal driver, 65 mm
07JAD-PL90100
Remove the oil seal (A) from the transmission housing (B).
NOTE: Be careful not to damage the transmission housing while removing the oil seals.
Remove the oil seal (A) from the clutch housing (B).
Install the new oil seal in the transmission housing with the special tools.
Install the new oil seal in the clutch housing with the special tools.