M/T Countershaft Disassembly
-
Securely clamp the countershaft assembly in a bench vise with wood blocks.
-
Remove the special bolt (left-hand threads).
|
|
-
Support ball bearing (A) 6th gear (B) on steel blocks (C), then use a press (D) and an attachment (E) to press the countershaft out of the ball bearing.
-
Remove the 32 mm shim and distance collar.
|
|
-
Support 4th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the 5th gear.
|
|
-
Support 2nd gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of 3rd gear.
|
|
-
Support 1st gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the 1st/2nd synchro.
|
|