( TF09E60E34150117434KBAT00 )
M/T Clutch Housing Countershaft Bearing Replacement
Special Tools Required

Adjustable bearing remover head, 20−40 mm
  07JAC-PH80100

Bearing remover shaft
 07JAC-PH80200

Slide hammer weight
 07741-0010201

Oil seal driver, 65 mm
 07JAD-PL90100
  1. Remove the needle bearing (A) using the special tool, then remove the oil gauge plate C.
  1. Position the oil guide plate C and new needle bearing (A) in the bore of the clutch housing (B).
  1. Install the needle bearing using the special tools.