( TF09E4SJ18526234602KBAT00 )
Front Inner Fender Replacement
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the body.
  1. Remove the front inner fender (A).
    -1.
    On the back of the wheel arch, remove the screws (B), and remove the front splash guard (C) (for some models).
    -2.
    From under the front bumper (D), remove the screw (E) securing the front bumper, the splash shield (F), and the front inner fender.
    -3.
    Remove the clip (G) securing the front bumper and the front inner fender.
    -4.
    From the wheel arch, remove the screw (H), clip (I, J, K), clip (L).
    -5.
    Release the hook (M) of the splash shield, then remove the front inner fender.
    NOTE: To remove the clips G, I, pry the inner the clip up at the edge near the line (N) on its head.
  1. Install the inner fender in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips and the hook into place securely.