-
-
Remove the fuel gauge sending unit (A), and the reservoir (B).
-
Remove the fuel pressure regulator (C), the fuel pump (D), and the wire harness (E) from the fuel filter set (F).
-
Check these items before installing the fuel tank unit:
-
When connecting the wire harness, make sure the connection is secure and the connectors are firmly locked into place.
-
When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
-
NOTE:
-
Coat the O-rings with clean engine oil; do not use any other oil or fluid.
-
Do not pinch the O-rings during installation.
-
Use all the new parts supplied in the fuel filter replacement kit.
|