Special Tools Required
Fuel gauge assy. 600 kPa
07406-0040004
Fuel pressure gauge attachment set
07ZAJ-S5A0101
Fuel attachment C hose
07ZAJ-S7C0100
Fuel attachment C joint
07ZAJ-S7C0200
-
-
Disconnect the quick-connect fitting. Attach the fuel pressure gauge set and the fuel gauge assy.
-
Start the engine, and let it idle.
-
If the engine starts, go to
Step 5
.
-
If the engine does not start, go to
Step 4
.
-
Check to see if the fuel pump is running: Listen to the fuel filler port with the fuel fill cap removed. The fuel pump should run for 2 seconds when the ignition switch is first turned on.
-
If the pump runs, go to
Step 5
.
-
-
Read the fuel pressure gauge. The pressure should be 320−370 kPa (3.3−3.8 kgf/cm
2
, 47−54 psi).
|
|