( TF09E4SA20323425211KBAT00 )
EVAP Canister Replacement

RHD model
  1. Disconnect the hoses (A).
  1. Remove the EVAP canister (B).
  1. Install the parts in the reverse order of removal.
    NOTE: Align the marks (D) on the hose as shown, then insert the hose. Make sure the clamp is positioned as shown.

LHD model
  1. Lift the vehicle, and support it with jackstands.
  1. Disconnect the hoses (A) and tube (B).
  1. Remove the EVAP canister (C).
  1. Install the parts in the reverse order of removal.
    NOTE: Align the marks (E) on the hose as shown, then insert the hose. Make sure the clamp is positioned as shown.