-
From back of the front fender (A), remove the fuel fill door opener cable (B) from the fuel filler lid (C), take care not to scratch the front fender.
-
Install the front fender in the reverse order of removal, and note these items:
-
Make sure the fuel fill door latch is installed properly.
-
Make sure the fuel fill door opens properly and locks securely.
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Apply touch-up paint to the front fender installation bolts, and around the front fender.
-
Front fender in or out until it's flush with the door, and up or down as necessary to equalize the gaps.
-
|
|