Relieve the subfuel pressure.

Remove the front bumper.

Remove the right headlight.

Remove the front pillar corner trim.

Remove the right side front inner fender clips.

Remove the right front fender.

Disconnect the subfuel feed pump 4P connector (A).

Remove the bolt (B) from the subfuel pump subharness holder (C).

Remove the bolt (D) and nut (E) from the fuel subtank (F).

Remove the subfuel feed pipe protector (A) and (B).

Disconnect the hoses (A).

Remove the bolt (B) from the subfuel tank (C).

Install the parts in the reverse order of removal.