Identify each part as it is removed so that each item can be reinstalled in its original position.

Inspect the rocker arm shaft and the rocker arms.

If reused, the rocker arms must be installed in the their original location.

Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.

Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.

When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.

When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.

Identify each part as it is removed so that each item can be reinstalled in its original position.

Inspect the rocker arm shaft and the rocker arms.

If reused, the rocker arms must be installed in the their original location.

Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.

Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.

When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.

When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.

Identify each part as it is removed so that each item can be reinstalled in its original position.

Inspect the rocker arm shaft and the rocker arms.

If reused, the rocker arms must be installed in the their original location.

Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.

Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.

When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.

When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.

Identify each part as it is removed so that each item can be reinstalled in its original position.

Inspect the rocker arm shaft and the rocker arms.

If reused, the rocker arms must be installed in the their original location.

Remove the rocker shaft bolt before removing the rocker shaft from the No. 5 rocker shaft holder.

Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points.

When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.

When reassembling the rocker arm and shaft assembly, position the arrows on the rocker shaft holders facing the cam chain side.