-
Clean all parts thoroughly in solvent, and dry them with compressed air. Blow out all passages.
-
Do not use a magnet to remove the check balls, it may magnetize the check balls.
-
Inspect the main valve body for scoring and damage.
-
-
Coat all parts with ATF during assembly.
VALVE SPRING SPECIFICATIONS
Valve Springs
|
Standard (New)-Unit: mm (in.)
|
Wire Diameter
|
O.D.
|
Free Length
|
No. of Coils
|
A
|
Cut valve B spring
|
0.8 (0.031)
|
9.9 (0.290)
|
27.3 (1.075)
|
8.0
|
B
|
Shift valve A spring
|
0.8 (0.031)
|
7.1 (0.280)
|
23.7 (0.933)
|
9.7
|
C
|
Shift valve C spring
|
0.8 (0.031)
|
7.1 (0.280)
|
23.7 (0.933)
|
9.7
|
D
|
Relief valve spring
|
1.0 (0.039)
|
9.6 (0.378)
|
34.1 (1.343)
|
10.2
|
E
|
Lock-up control valve spring
|
0.6 (0.024)
|
7.1 (0.280)
|
29.6 (1.165)
|
11.2
|
F
|
Cooler check valve spring
|
0.85 (0.033)
|
6.6 (0.260)
|
27.0 (1.063)
|
11.3
|
G
|
Shift valve D spring
|
0.8 (0.031)
|
5.6 (0.220)
|
28.1 (1.106)
|
15.9
|
H
|
Servo control valve spring
|
0.8 (0.031)
|
9.9 (0.290)
|
27.3 (1.075)
|
8.0
|
|