( TF09E1PE10411239521KBAT00 )
Torque Converter Housing Mainshaft Bearing and Oil Seal Replacement
Special Tools Required

Adjustable bearing remover set
 07JAC-PH80000

Driver handle 15 x 135L
 07749-0010000

Driver attachment, 62 x 68 mm
 07746-0010500

Driver attachment, 72 x 75 mm
 07746-0010600
  1. Remove the mainshaft bearing and oil seal with the special tool.
  1. Install the new mainshaft bearing until it bottoms in the torque converter housing with the special tools.
  1. Install the new oil seal flush with the housing with the special tools.