( TF09E1PE10410917424KBAT00 )
Torque Converter Housing Countershaft Bearing and Oil Seal Replacement
Special Tools Required

Adjustable bearing remover set
 07JAC-PH80000

Driver handle 15 x 135L
 07749-0010000

Oil seal driver attachment, 58 mm
 07JAD-PH80101
  1. Remove the countershaft bearing with the special tool.
  1. Install the ATF guide plate (A).
  1. Install the new countershaft bearing (B) in the housing with the special tools; install the bearing outer race surface in height (C) of 0−0.03 mm (0−0.001 in.) above the housing surface (D). Do not install the bearing exceeding 0.03 mm (0.001 in.) high from housing surface.