-
Tighten the bolts on the transmission range switch while you continue to hold the N position. Do not move the transmission range switch when tightening the bolts. Remove the feeler gauge.
-
Check the connectors for rust, dirt, or oil, clean or repair if necessary, then connect the connector securely.
-
Turn the ignition switch to ON (II). Move the shift lever through all positions, and check the transmission range switch synchronization with the A/T gear position indicator.
-
Check that the engine starts in P and N, and does not start in any other shift lever position.
-
Check that the back-up lights come on when the shift lever is in R.
-
Allow the front wheels to rotate freely, then start the engine, and check the shift lever operation.
|
|