-
Raise the vehicle on a lift, or apply the parking brake, block rear wheels, and raise the front of the vehicle. Make sure it is securely supported.
-
Remove the splash shield.
-
Disconnect the 3rd clutch transmission fluid pressure switch connector, then remove the 3rd clutch transmission fluid pressure switch (A).
-
Install the new 3rd clutch transmission fluid pressure switch with a new sealing washer (B), and tighten the metal part of the switch.
-
Make sure there is no water, oil, dust, or foreign particles inside the connector.
-
Connect the connector securely.
-
Install the splash shield.
|
|