-
Remove the 2nd clutch transmission fluid pressure switch (A).
-
Make sure there is no water, oil, dust, or foreign particles inside the connector.
-
Install the new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the metal part of the switch.
-
Remove the 3rd clutch transmission fluid pressure switch (C).
-
Make sure there is no water, oil, dust, or foreign particles inside the connector.
-
Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (D), and tighten the metal part of the switch.
|
|