-
-
Disconnect the ATF cooler hoses (A) from the ATF filter (B).
-
Remove the ATF filter holder (C).
-
Remove the ATF filter, and replace it.
-
Install the new ATF filter on the filter mounting bracket (D), and secure it with its holder and bolt.
-
Slide the ATF cooler hose on the ATF filter until the hose end contacts the filter housing, and secure the hose with the clip (E) at 6−8 mm (0.24−0.31 in.) (F) from the filter housing. Install the cooler hose on the other side of the ATF filter in the same manner.
-
|
|