DTC 28-22:
Longitudinal Acceleration Sensor Stuck
-
Turn the ignition switch to ON (II).
-
Clear the DTC with the HDS.
-
Test-drive the vehicle. Drive the vehicle at 10 km/h (7 mph) or more.
NOTE: Drive the vehicle on a straight section of road, not on a lift.
-
Check for DTCs with the HDS.
YES
|
-
|
|
NO
|
-
|
If any other DTCs are indicated, go to the indicated DTCs troubleshooting. If DTCs are not indicated, intermittent failure, the system is OK at this time.■
|
-
Test-drive the vehicle. Check the LONGITUDINAL ACCELERATION SENSOR in the VSA DATA LIST with the HDS while driving in corners.
Does the indicated value change?
|
YES
|
-
|
Intermittent failure, the system is OK at this time.■
|
NO
|
-
|
|
|