DTC 51-xx, 52-xx, 53-xx, 54-xx, 55-xx (‘‘x'' can be 0 thru 9 or A thru F):
Internal Failure of the SRS Unit
NOTE:
-
Before troubleshooting any of these DTCs, check the battery/system voltage and battery cable connections. If the voltage is low, repair the charging system or replace the battery before troubleshooting the SRS. If the battery/system voltage is now OK, ask the customer if the battery ever went dead or if the engine was started and run with the battery in a low state of charge. A dead battery may trigger one or more of these DTCs.
-
-
Before replacing the SRS unit, check the SRS unit software version with the HDS. If the software version is not the latest,
update the SRS unit software
and retest.
-
-
Turn the ignition switch to ON (II), then wait for 10 seconds.
-
Check that the SRS indicator goes off.
Does the SRS indicator go off?
|
|