DTC 21-3x (‘‘x'' can be 0 thru 9 or A thru F):
Short to Another Wire or Decreased Resistance in the Left Side Seat Belt Tensioner
NOTE:
-
-
Turn the ignition switch to ON (II), then wait for 10 seconds.
-
-
Turn the ignition switch to LOCK (0).
-
-
-
-
-
Turn the ignition switch to ON (II), then wait for 10 seconds.
-
-
Turn the ignition switch to LOCK (0).
-
-
-
-
Measure the resistance between the No. 12 and No. 13 terminals of SRS unit connector B (39P). There should be 0−1.0 Ω.
Is the resistance as specified?
|
YES
|
-
|
Short in the floor wire harness; replace the floor wire harness.■
|
NO
|
-
|
|
|