|
DTC B1155:
Gauge Control Module Lost Communication with the MICU (Headlight Switch Message)
-
Clear the DTCs with the HDS.
-
Turn the ignition switch to LOCK (0), and then back to ON (II).
-
Wait for 6 seconds or more.
-
Check for DTCs with the HDS.
|
YES
|
-
|
|
|
NO
|
-
|
Intermittent failure, the gauge control module is OK at this time. Check for loose or poor connections between the gauge control module and the MICU.■
|
-
Check for DTCs with the HDS.
|
Are DTCs B1155 and B1905 indicated?
|
|