( TF09E00J54460647123FEAT00 )
Power Window Master Switch Test
  1. Disconnect the 22P connector (A) from the power window master switch.
  1. Check for continuity between the terminals in each switch position according to the tables.
    Driver's Switch
    The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the master switch input test procedures. If the tests are normal, the driver's switch must be faulty. Replace the switch.
  1. If the continuity is not as specified, replace the switch.
Front Passenger's Switch
Right Rear Switch
Left Rear Switch